Microplate Sealing Films and Tapes
Research Products International Corp ThermalSeal A Sealing Film, Non-Sterile, 100 per Package
ThermalSeal A Sealing Film features a thick layer of a specially formulated adhesive for improved protection from evaporation and leakage. Ideal for use with PCR plates and standard assay plates. Designed to fit inside the edge of raised rim plates to provide optimum sealing. Temperature range is -40°C to 120°C. Supplied with a plastic applicator. ThermalSeal A is a Trademark of Excel Scientific, Inc.
Advanced sealing
Thicker adhesive layer
DNase and RNase free
Agilent Technologies Agilent plate seal/mat, solid, 96-well, Santoprene seal/mat for, 2 mL well storage plate volumes, 100/pk
Agilent plate seal/mat, solid, 96-well, Santoprene seal/mat for, 2 mL well storage plate volumes, 100/pk
Andwin Scientific TITER-TOPS 100/PK
Made with 4.4 mil polyethylene film with an FDA approved non cytotoxic acrylic adhesive, Titer-Tops is a product that is ideal for preventing the evaporation of samples, the contamination of well to well, and the spillage of samples. The film is pre-cut in 6" x 3.25" rectangular shapes with a paper liner. This product is able to withstand chemicals and thermal conditions. Its adhesive is waterproof, solvent resistant, and suitable with all plastic microtiter plates. This is also UV transparent to 250nm. It is sold in a pack of 100.
Revvity Health Sciences Inc Plateseal, Removable and Resealable, 100/pk
Address any liquid scintillation counting need with Revvity's liquid scintillation cocktails, vials, and consumables. You can be confident that our products meet the highest standards of performance, user safety, environmental safety, and user convenience.
Andwin Scientific BREATHE-EASY ADH FILM G,100/PK
The 25 �m Breathe-Easy film can work under the temperature range of -80�C to 100�C. With the ability to absorb oxygen, carbon dioxide, and water vapors, this product is an ideal sealing film. It is also UV transparent down to 300 nm, non-cytotoxic, and sterile. A brayer or sealing paddle is needed to perform a proper sealing. This product is sold in a pack of 100.
Andwin Scientific Adhesive PCR Film Seals, Nonsterile, 100/cs
These heat resistant 50 um thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For Real-Time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.
Sigma Aldrich Fine Chemicals Biosciences ThermalSeal ATM sealing fi
ThermalSeal A sealing films are an advanced version of Excel Scientifics classic ThermalSeal A sealing films for PCR. ThermalSeal A films consist of 50 mum thick clear polypropylene with a thicker 50 mum layer of a stronger adhesive formulated for improved protection against evaporation and leakage during thermal cycling. Intended for non-real-time PCR applications ThermalSeal A films are designed to fit inside the edge of raised-rim PCR plates and provide more secure sealing of all wells because the center of the film does not extend over the plate rim. Two end tabs allow for easy positioning of the film on the plate but are perforated for easy removal if necessary.Each film measures 77.8 x 135.5 mm overall. Length between the perforations with end tabs removed is 118.1 mm. Each package of ThermalSeal A films includes one sealing paddle for ensuring a firm seal also compatible with raised-rim plates.Recommended for non-real-time PCR thermocycling applicationsStronger and t
Research Products International Corp Breathe-Easy Sealing Membrane, Regular Strength, 5 x 3 1/4 Inch Rectangles, 100 per Package
Breathe-Easy provides a gas permeable seal for microwell plates. Plates covered with Breathe-Easy allow a uniform rate of oxygen and CO2 exchange across the membrane. Promotes contaminant free growth of cell cultures, cellular based biological and immunological assays, cell selection and cell screening.
Plates covered with Breathe-Easy membrane can be inverted and agitated without cross contamination samples. Adhesive is FDA approved and will not interfere with human fibroblast cell growth and division. Resistant to most organic and caustic agents and withstands temperature from -80°C to 100°C.
Easy to use. Remove release liner, roll brayer several times in all directions to loosen protective top layer and peel away top layer.
Removable, not reusable.
Andwin Scientific TITER-TOPS NON-CYTOTOXIC GAM
The Titer-Tops film is a sealing film with polyethylene base, acrylic adhesive. It features thickness of 112 m and diameter of 152.4 x 82.6 mm. It is UV transparent to 250 nm. The film can be pierced with a pipet tip. It is also sterilized using gamma rays and is non-cytotoxic.
Research Products International Corp ThermalSeal RT Films for Real-Time PCR, 2ml thick, Non-Sterile, 100 per Package
ThermalSeal RT Films are optically transparent, non-absorbing, non-fluorescing and designed for use in Real-Time PCR applications. Films feature a smooth adhesive allowing extreme optical clarity and superior light transmission. End tabs and split backing allow accurate plate positioning. Available 100 per package. ThermalSeal RT is a Trademark of Excel Scientific, Inc.
Ideal for optical assay
Brilliant ultra-high optical clarity
RNase, DNase and nucleic acid free
Withstand -40° to +120 °C